科研论文

科研论文

当前位置:首页  科研成果  科研论文

序号

论文名称

发表刊物

发表时间

作者

37

Effect   of Co content on the microstructure, spreadability, conductivity and   corrosion resistance of Sn-0.7Cu alloy

Microelectronics Reliability

2020

樊江磊等

36

Microstructure   Evolution, Thermal and Mechanical Property of Co Alloyed Sn-0.7Cu Lead-Free   Solder

Journal of Electronic Materials

2020

樊江磊等

35

Effect   of carbon-fibre powder on friction and wear properties of copper-matrix   composites

Materials Science and Technology

2020

樊江磊等

34

Sn-Cu-Ni系无铅钎料研究进展

热加工工艺

2020

樊江磊等

33

Recent   Research and Development of Mould Materials for Casting TiAl Alloys

Materials Science and Technology

2019

樊江磊等

32

Effect   of Co substitution for Fe on the non-isothermal crystallization kinetics of   Fe80P13C7 bulk metallic glasses

Thermochemical Acta

2019

王艳等

31

Tribological   behavior of Cu-15Ni-8Sn/graphite under sea water, distilled water and   dry-sliding conditions

Journal of Central South University

2019

王艳等

30

Effect of   ultrafine gradient cemented carbides substrate on the performance of coating   tools for titanium alloy high speed cutting

International Journal of Refractory Metals; Hard   Materials

2019

周向葵等

29

Preparation   and microstructure of layered structure functional gradient cemented carbides

Functional Materials Letters

2019

周向葵等

28

Effect   of Compaction Parameters on the Magnetic and Corrosive Properties of Soft   Magnetic Composites with Parylene Insulation

Journal of Superconductivity and Novel Magnetism

2019

吴深等

27

Use of   an Irregular Cone to Reduce Ice-Induced Vibration of a Vertical Riser Pipe

Journal of Cold Regions Engineering

2019

王胜永等

26

Vibration   based numerical and experimental analysis on debonding defect identification   for lattice sandwich plate

International journal of applied electromagnetics   and mechanics

2019

田淑侠等

25

FeSi6.5/Fe复合磁粉芯的制备及磁性能研究

电子材料与元件

2019

吴深

24

Nb-TiAl合金α2→α等温相变中的组织演变

钛工艺进展

2019

李莹等

23

摩擦环境对Cu/graphite复合材料摩擦磨损行为的影响

热加工工艺

2019

王艳等

22

成型压力对铜基粉末冶金摩擦材料性能的影响

有色金属

(冶炼部分)

2019

刘建秀等

21

WC含量对铜基粉末冶金摩擦材料性能的影响

粉末冶金工业

2019

刘建秀等

20

Cu粉类型对铜基摩擦材料性能的影响

特种铸造及有色合金

2019

刘建秀等

19

Cr-Fe类型对铜基粉末冶金摩擦材料性能的影响

粉末冶金工业

2019

刘建秀等

18

微纳米双尺度混杂颗粒增强铝基复合材料的制备工艺

有色金属工程

2019

高红霞等

17

混杂颗粒增强铝基复合材料的研究进展

粉末冶金工业

2019

高红霞等

16

Effect of Ni layer on the microstructure   evolution and mechanical property of Cu-based bearing shell with aging   treatment

Materials Chemistry and Physics

2018

樊江磊等

15

Effect of Cr–Fe on friction and wear   properties of Cu-based friction material

Materials Science and Technology

2018

樊江磊等

14

Synthesis and magnetic properties of   soft magnetic composites based on silicone resin-coated iron powders

Journal of   Superconductivity and Novel Magnetism

2018

吴深等

13

Vibration Based Numerical and   Experimental Analysis on Debonding Defect Identification for Lattice Sandwich   Plate

International Journal of Applied   Electromagnetic Mechanics

2018

田淑侠等

12

Sn-Cu系无铅钎料微合金化研究进展

材料导报

2018

樊江磊等

11

碳纤维增强铜基复合材料研究进展

材料科学与工程学报

2018

刘建秀等

10

基体铜的粒度对铜基粉末冶金摩擦材料性能的影响

材料与冶金学报

2018

刘建秀等

9

Co含量对Sn-0.7Cu合金组织演化及力学性能的影响

热加工工艺

2018

樊江磊等

8

热处理和粉末形态对Fe-SiO2软磁复合材料磁性能的影响

热加工工艺

2018

吴深等

7

SiC颗粒增强耐磨铝基复合材料组织及性能研究

热加工工艺

2018

高红霞等

6

Effects of solidification parameters   on the growth direction of α phase in directionally solidified Ti-49Al alloy

Intermetallics

2017

樊江磊等

5

Microstructure formation and   interface characteristic of directionally solidified TiAl-Si alloy in alumina   crucible with new Y2O3 skull-aided technology

Scientific Reports

2017

樊江磊等

4

立方相对超细晶梯度硬质合金组织和性能的影响

稀有金属材料与工程

2017

周向葵等

3

Ni层对时效处理离心浇铸铜基轴瓦组织和性能的影响

材料导报

2017

樊江磊等

2

NiZnFe2O4包覆铁基软磁复合材料的制备及性能

材料工程

2017

吴深等

1

压电陶瓷精密位移系统的变论域模糊控制法

自动化与仪表

2017

刘建秀等


返回原图
/