序号 | 论文名称 | 发表刊物 | 发表时间 | 作者 |
52 | Effect of Y Alloying on Microstructure and Mechanical Properties of Ti-48Al Alloy | JOM | 2022 | 樊江磊等 |
51 | Effect of the Coke/Flake Graphite Ratio on the Microstructure and Properties of Cu-Based Powder Metallurgy Friction Materials | Journal of Materials Engineering and Performance | 2022 | 樊江磊等 |
50 | 定向凝固速率对ZChSnSb8-4合金组织及力学性能的影响 | 特种铸造及有色合金 | 2022 | 刘建秀等 |
49 | 高温无铅软钎料的研究进展 | 特种铸造及有色合金 | 2022 | 樊江磊等 |
48 | 退火时间对BAg30CuZnSn钎料合金组织和性能的影响 | 有色金属工程 | 2022 | 樊江磊等 |
47 | 软磁复合材料制备工艺的研究进展 | 电子元件与材料 | 2022 | 吴深等 |
46 | Effect of lamellae orientation on tensile properties of directionally solidified Ti-46Al-0.5W-0.5Si alloy | Materials Science and Technology | 2021 | 樊江磊等 |
45 | Lamellae Orientation Control and Mechanical Properties of Directionally Solidified Binary Ti-49Al Alloy in Oxide Ceramics Crucible | International Journal of Metalcasting | 2021 | 樊江磊等 |
44 | 碳纤维增强铜基复合材料（Cf/Cu）中碳纤维表面改性与结合界面性能的研究现状 | 材料科学与工程学报 | 2021 | 刘建秀等 |
43 | Ni含量对Sn-0.7Cu无铅钎料钎焊性能的影响 | 有色金属工程 | 2021 | 樊江磊等 |
42 | Effect of Co content on the microstructure, spreadability, conductivity and corrosion resistance of Sn-0.7Cu alloy | Microelectronics Reliability | 2020 | 樊江磊等 |
41 | Microstructure Evolution, Thermal and Mechanical Property of Co Alloyed Sn-0.7Cu Lead-Free Solder | Journal of Electronic Materials | 2020 | 樊江磊等 |
40 | Effect of carbon-fibre powder on friction and wear properties of copper-matrix composites | Materials Science and Technology | 2020 | 樊江磊等 |
39 | TiAl合金熔体与铸型界面反应研究进展 | 轻工学报 | 2020 | 樊江磊等 |
38 | 高频低损耗软磁复合材料的研究进展 | 轻工学报 | 2020 | 吴深等 |
37 | 烧结温度对硬质合金梯度形成及晶粒生长的影响 | 轻工学报 | 2020 | 周向葵等 |
36 | 冷却速率及钛元素对过共晶高铬铸铁微观组织的影响 | 热加工工艺 | 2020 | 周向葵等 |
35 | Sn-Cu-Ni系无铅钎料研究进展 | 热加工工艺 | 2020 | 樊江磊等 |
34 | 高Nb-TiAl合金α2→α等温相变中的组织演变 | 钛工业进展 | 2020 | 李莹等 |
33 | Recent Research and Development of Mould Materials for Casting TiAl Alloys | Materials Science and Technology | 2019 | 樊江磊等 |
32 | Effect of Co substitution for Fe on the non-isothermal crystallization kinetics of Fe80P13C7 bulk metallic glasses | Thermochemical Acta | 2019 | 王艳等 |
31 | Tribological behavior of Cu-15Ni-8Sn/graphite under sea water, distilled water and dry-sliding conditions | Journal of Central South University | 2019 | 王艳等 |
30 | Effect of ultrafine gradient cemented carbides substrate on the performance of coating tools for titanium alloy high speed cutting | International Journal of Refractory Metals; Hard Materials | 2019 | 周向葵等 |
29 | Preparation and microstructure of layered structure functional gradient cemented carbides | Functional Materials Letters | 2019 | 周向葵等 |
28 | Effect of Compaction Parameters on the Magnetic and Corrosive Properties of Soft Magnetic Composites with Parylene Insulation | Journal of Superconductivity and Novel Magnetism | 2019 | 吴深等 |
27 | Use of an Irregular Cone to Reduce Ice-Induced Vibration of a Vertical Riser Pipe | Journal of Cold Regions Engineering | 2019 | 王胜永等 |
26 | Vibration based numerical and experimental analysis on debonding defect identification for lattice sandwich plate | International journal of applied electromagnetics and mechanics | 2019 | 田淑侠等 |
25 | FeSi6.5/Fe复合磁粉芯的制备及磁性能研究 | 电子材料与元件 | 2019 | 吴深 |
24 | 高Nb-TiAl合金α2→α等温相变中的组织演变 | 钛工艺进展 | 2019 | 李莹等 |
23 | 摩擦环境对Cu/graphite复合材料摩擦磨损行为的影响 | 热加工工艺 | 2019 | 王艳等 |
22 | 成型压力对铜基粉末冶金摩擦材料性能的影响 | 有色金属 （冶炼部分） | 2019 | 刘建秀等 |
21 | WC含量对铜基粉末冶金摩擦材料性能的影响 | 粉末冶金工业 | 2019 | 刘建秀等 |
20 | Cu粉类型对铜基摩擦材料性能的影响 | 特种铸造及有色合金 | 2019 | 刘建秀等 |
19 | Cr-Fe类型对铜基粉末冶金摩擦材料性能的影响 | 粉末冶金工业 | 2019 | 刘建秀等 |
18 | 微纳米双尺度混杂颗粒增强铝基复合材料的制备工艺 | 有色金属工程 | 2019 | 高红霞等 |
17 | 混杂颗粒增强铝基复合材料的研究进展 | 粉末冶金工业 | 2019 | 高红霞等 |
16 | Effect of Ni layer on the microstructure evolution and mechanical property of Cu-based bearing shell with aging treatment | Materials Chemistry and Physics | 2018 | 樊江磊等 |
15 | Effect of Cr–Fe on friction and wear properties of Cu-based friction material | Materials Science and Technology | 2018 | 樊江磊等 |
14 | Synthesis and magnetic properties of soft magnetic composites based on silicone resin-coated iron powders | Journal of Superconductivity and Novel Magnetism | 2018 | 吴深等 |
13 | Vibration Based Numerical and Experimental Analysis on Debonding Defect Identification for Lattice Sandwich Plate | International Journal of Applied Electromagnetic Mechanics | 2018 | 田淑侠等 |
12 | Sn-Cu系无铅钎料微合金化研究进展 | 材料导报 | 2018 | 樊江磊等 |
11 | 碳纤维增强铜基复合材料研究进展 | 材料科学与工程学报 | 2018 | 刘建秀等 |
10 | 基体铜的粒度对铜基粉末冶金摩擦材料性能的影响 | 材料与冶金学报 | 2018 | 刘建秀等 |
9 | Co含量对Sn-0.7Cu合金组织演化及力学性能的影响 | 热加工工艺 | 2018 | 樊江磊等 |
8 | 热处理和粉末形态对Fe-SiO2软磁复合材料磁性能的影响 | 热加工工艺 | 2018 | 吴深等 |
7 | SiC颗粒增强耐磨铝基复合材料组织及性能研究 | 热加工工艺 | 2018 | 高红霞等 |
6 | Effects of solidification parameters on the growth direction of α phase in directionally solidified Ti-49Al alloy | Intermetallics | 2017 | 樊江磊等 |
5 | Microstructure formation and interface characteristic of directionally solidified TiAl-Si alloy in alumina crucible with new Y2O3 skull-aided technology | Scientific Reports | 2017 | 樊江磊等 |
4 | 立方相对超细晶梯度硬质合金组织和性能的影响 | 稀有金属材料与工程 | 2017 | 周向葵等 |
3 | Ni层对时效处理离心浇铸铜基轴瓦组织和性能的影响 | 材料导报 | 2017 | 樊江磊等 |
2 | NiZnFe2O4包覆铁基软磁复合材料的制备及性能 | 材料工程 | 2017 | 吴深等 |
1 | 压电陶瓷精密位移系统的变论域模糊控制法 | 自动化与仪表 | 2017 | 刘建秀等 |
